PRODUCT Products
Product list
Innovative multi-gas analyzer using nano-silicon technology• A new gas chromatography system that can be multiplexed• Highly integrated, portable gas analyzer• For 19-inch racks• Modular and flexible architecture• Up to four plug-and-play analysis modules can be integrated for simultaneous analysis of a single sample Detection Technology:The unique combination of high-performance, multi-physical detection (nano-mechatronics and thermal conductivity detectors) enables near-ppm level detection Involved applications:• Quality analysis and behavioral testing of natural gas and biogas• Industrial emissions and detection of volatile organic compounds• Permanent gas, special gasSystem Specifications:The whole system weighs 7 kgThe whole system size 450 × 460 × 220 mm Typi...
LaserWarn is an open system based on patented quantum laser technology that can detect hundreds of toxic and harmful gases such as VOCs, ammonia, phosgene, sarin gas and VX etc. The system can be used to detect gases in the range of thousands of square meters Leaks, fugitive emissions, and chemical hazards can be used both indoors and outdoors.LaserWarn's lasers are safe for the human eye, enabling 24-hour real-time monitoring of leaks and threats of VOCs and toxic and hazardous gases and early warning. The system can detect very low concentrations of gas, the measured target gas once passed through the laser irradiation line, you can be detected within a second time. Compared to FTIR and other traditional point-sensor monitoring networks, the system requires no consumables and maintains v...
CAI FID analyzers rely on the Flame Ionization Detection principle to measure the total concentration of hydrocarbons in a gas sample. The gas sample becomes ionized in the flame and the electrostatic field causes the charged particles to migrate, creating a small current that is measured by the amplifier. The current is directly proportional to the amount of hydrocarbon in the sample. The 700 MHFID model measures Total Hydrocarbon and provides a means of differentiating between Methane and non-Methane hydrocarbons.CAI FID analyzers can measure THC or CH4 in ppm or percent levels. They are ideal for applications such as:▪ VOC abatement/scrubber efficiency▪ Combustion engine testing▪ EPA Method 25A compliance monitoring▪ Continuous emission monitoring (CEMs)▪ Vehicl...
CAI offers three analyzer models that utilize Fourier Transfer Infrared technology for measuring concentrations of multiple gases within a sample. CAI FTIR analyzers deliver fast, accurate analysis of virtually any gas that has an infrared absorption spectrum.▪ FTIR Products Data Sheet▪ 700 FTIR – Most IR-absorbing gases at ppb and low-ppm levels▪ 700 FTIR Heated Sampler – For optimal hot/wet sample handling700 FTIR Heated SamplerCAI FTIR analyzers are based on Fourier Transform Infrared Spectroscopy. Non-symmetrical gas phase molecules absorb IR light, causing the molecular bonds to stretch, bend or rotate. This absorption is used to measure and quantify several chemical components simultaneously. CAI FTIR analyzers are well-suited for a wide range of applications, including:▪ S...
CAI offers three analyzer models that utilize chemiluminescence technology for analyzing NO, NOx and NO2 concentrations within a gas sample.▪ 700 CLD - NOx, NO, NO2The chemiluminescence method is used to measure the reaction between ozone and nitric oxide. In the NOx mode, the sample is routed through a converter. The resultant reaction is directly proportional to the total concentration of NOx. The reliability and rapid response time of CAI CLD analyzers make them particularly well-suited for the following applications:▪ Continuous emissions monitoring (CEM)▪ Vehicle emissions▪ Scrubber efficiency▪ Combustion efficiency▪ Ammonia slip▪ Process control▪ Power plant de-nitrification▪ Fuel cell analysisCLD Analyzer Highlights▪ Measure NO/NOx from 0 to 3,000 ppm full scale▪ Rapid res...
CAI offers two analyzer models that use Non-Dispersive Infrared (NDIR) technology to measure the concentrations of IR-absorbing gases in a sample. The 600 and ZRE models utilize paramagnetic or fuel cell technology to measure Oxygen. ▪ 700 NDIR/O2 – Up to 3 IR channels or 2 IR channels + O2▪ZRE NDIR/O2 – Up to 4 IR channels (including SO2, NOx) + O2CAI NDIR analyzers’ measurements are based on the infrared absorption characteristics of gases. Using a single infrared beam to measure gas concentrations, they deliver highly stable and reliable results. CAI NDIR analyzers are well-suited for a wide range of applications, including:▪ Stack gases (CEM)▪ Vehicle emissions▪ Combustion efficiency▪ Turbine/generator feedback control▪ Process chemical gas analysis▪ Fuel cell analysis▪ ...
common12StripPage1/2HomePre12NextEnd
            Copyright ©2005 - 2018 ADVANCEDANALYZERS
犀牛云提供企业云服务
Address:No.11,Lane 288,Yonghang Road, Songjiang District,Shanghai
电话:+86 0755-2955 6666
传真:+86 0755-2788 8009
邮编:330520